4IK 80mm 25W Micro Speed Control Motor
· High-efficiency Induction Core (Continuous Rating)
· Precision Ground Parallel Shaft Gearbox
· Reliable Class B Insulation & IP20 Protection
· Available in Single-Phase (110V/220V) & Three-Phase (220V/380V)
■ Motor Model Numbering System
5①
I②
K③
40④
R⑤
GN⑥
–
C⑦
T⑧
| Item | Technical Specification & Meaning |
|---|---|
| ① Frame Size | 0: 42mm | 2: 60mm | 3: 70mm | 4: 80mm | 5: 90mm | 6: 104mm |
| ② Motor Type | I: Induction | R: Reversible | T: Torque |
| ③ Series | K Series |
| ④ Output Power | 40: 40W (Nominal output power wattage) |
| ⑤ Speed Control | R: Speed Adjustable | None: Fixed Speed |
| ⑥ Shaft Type | GN/GU: Pinion Shaft | A: Round | A1: Keyway |
| ⑦ Voltage & Poles |
A:Single-phase(1Φ) 110V 50/60Hz4P
B:Single-phase(1Φ) 110V 50Hz2P
C:Single-phase(1Φ) 220/230V 50Hz4P
D:Single-phase(1Φ) 220V 50Hz2P
E:Single-phase(1Φ) 110V/120V 60Hz4P
H:Single-phase(1Φ) 220/230V 60Hz4P
S:Three-phase(3Φ) 200/220/230V 50/60Hz4P
S3:Three-phase(3Φ) 380/400/415V 50/60Hz4P
T:Three-phase(3Φ) 200/220/230V 50/60Hz2P
T3:Three-phase(3Φ) 380/400/415V 50/60Hz2P
|
| ⑧ Accessories | T: Terminal Box | F/FF: Fan | M: Brake |
■ Reducer Model Numbering System
5①
GU②
50③
RH④
| Item | Technical Specification & Meaning |
|---|---|
| ① Gearhead frame size | 4: 80mm | 5: 90mm | 6: 104mm |
| ② Type of pinion | GN : GN type gear | GU : GU type gear |
| ③ Gear ratio |
(e.g.) 50 : Gear ratio of 1 : 50 10x denotes the decimal gearhead of ratio 1 : 10 |
| ④ Type of output shaft |
RH : Hollow worm shaft RA : Worm output shaft RC : Spiral bevel hollow shaft RT : Spiral bevel output shaft |
* Note: If the motor is assembled with a parallel shaft gear box, please cancel item no 5. If assembly with right angle gear box, please cancel item no 4.
■ Specs Speed Control Motor
|
Model Lead Wire Type / Pinion Shaft |
Output power W |
Voltage V |
Frequency Hz |
Speed Control Range r/min |
Allowance Torque mN.m |
Starting Torque mN.m |
Current A |
Capacitor μF |
|
|---|---|---|---|---|---|---|---|---|---|
| 1200r/min | 90r/min | ||||||||
| 4IK25RGN-A | 25 | 1ph 100 | 50 | 90～1400 | 190 | 47 | 88 | 0.50 | 8.0 |
| 60 | 90～1700 | 0.55 | |||||||
| 4IK25RGN-E | 25 | 1ph 110 | 60 | 90～1700 | 190 | 50 | 105 | 0.45 | 7.0 |
| 1ph 120 | 0.50 | ||||||||
| 4IK25RGN-C | 25 | 1ph 220 | 50 | 90～1400 | 190 | 47 | 88 | 0.25 | 1.8 |
| 1ph 230 | 0.23 | ||||||||
| 4IK25RGN-H | 25 | 1ph 220 | 60 | 90～1700 | 190 | 45 | 88 | 0.23 | 1.8 |
| 1ph 230 | |||||||||
● When the motor is approved under various safety standards, the model name on the nameplate is the approved model name.
● Note: “-A” it means the voltage 110V, the assembly capacitor value it is according to the label.
■ Allowance Torque Unit : Upside(N.m)/Belowside(kgf.cm)
| Type Motor/Gearhead |
Gear Ratio | 7.5 | 9 | 12.5 | 15 | 18 | 25 | 30 | 36 | 50 | 60 | 75 | 90 | 100 | 120 | 150 | 180 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Speed r/min |
50Hz | 200 | 166 | 120 | 100 | 83 | 60 | 50 | 41 | 30 | 25 | 20 | 16 | 15 | 12 | 10 | 8 | |
| 60Hz | 240 | 200 | 144 | 120 | 100 | 72 | 60 | 50 | 36 | 30 | 24 | 20 | 18 | 15 | 12 | 10 | ||
|
4IK25RGN-A□ 4IK25RGN-E□ 4IK25RGN-C□ 4IK25RGN-H□ |
4GN□RC 4GN□RT |
50Hz | 0.99 | 1.18 | 1.64 | 1.97 | 2.37 | 3.29 | 3.95 | 4.73 | 6.58 | 7.10 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 |
| 10.1 | 12.1 | 16.8 | 20.1 | 24.2 | 33.5 | 40.3 | 48.3 | 67.1 | 72.5 | 80.0 | 80.0 | 80.0 | 80.0 | 80.0 | 80.0 | |||
| 60Hz | 0.80 | 0.95 | 1.33 | 1.59 | 1.91 | 2.65 | 3.18 | 3.82 | 5.30 | 5.73 | 7.16 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 | ||
| 8.12 | 9.74 | 13.5 | 16.2 | 19.5 | 27.1 | 32.5 | 39.0 | 54.1 | 58.4 | 73.0 | 80.0 | 80.0 | 80.0 | 80.0 | 80.0 | |||
■ Dimensions (Unit mm)
■ Wiring Diagram
■ Features For Speed Control Motor
1.lt is a unt of the controller motor.It only needs to connect one time. The speed can be easily adjusted by the potentiometer. The controller is fixed with sped-control loop,capacitor, speed enactment and etc. There is no function of instant stop in the unit.
2.The controller can make the speed variable between 90-1400r/min at 50Hz and 90-1700r/min at 60Hz.
3.Please don’t run motor at low speed for long time avoiding overheat.